Blades Set
Jul/100
Blades Set
Choosing The Right Circular Saw Blade
You can have a top of the line circular saw but without a good blade it doesn't amount to much. Having the right blade for the job you are doing is critical to making a clean cut and making the cut safely. Depending on the material you are cutting and the results you are looking for you have to choose a blade for your circular saw accordingly.
Generally the blade will be a standard 7-1/4" in diameter. You can get general purpose blades for under $10 but to get a high quality blade you can expect to pay $50, $75 or more.
When choosing a blade I prefer to have a thin-kerf blade since it is easier to make a cut (kerf refers to the width of the cutting teeth). I also inspect the blade to make sure there are no chips in the carbide teeth. Running your finger nail along the edge of the blade will reveal any pits that you cannot see.
The blade and teeth should have no rust and be smooth and shiny. A dirty blade requires more force to make a cut which will result in a rough cut or cause an injury. Any dirty blades should be cleaned by using an industrial cleaner. This will dissolve any pitch or gummy substances left from cutting wood.
Different circular saw blades and their uses
Masonry Blade
A masonry blade is smooth with no teeth. This is because it grinds material away rather then cuts it. When using a masonry blade you should always wear a dust mask to prevent inhaling and hazardous substances. Masonry blades are ideal for scoring concrete pavers or cutting bricks.
Plywood Blade
Ideal for cutting cabinet grade plywood or plywood with a thin veneer, plywood blades nibble away the wood rather then chew it up like a general purpose blade. A plywood blade has a lot more teeth then other types of circular saw blades, often over 70 teeth. This makes for a very clean cut with no chip-out.
Chisel Tooth Blades
These types of blades are what usually come with a low to mid range circular saw. They often have only steel teeth which cut very well when sharp but are easily dulled. They are seldom used by professional since they do not maintain their cutting edge.
Trim Blades
Primarily for finishing cuts, a trim blade has 40 to 60 teeth, each with a premium carbide tip. A trim blade cuts slower then a general purpose blade but leaves a smooth sharp edge. They are ideal for cross cutting dimensional lumber and cutting plywood.
Decking Blades
Used for trimming off decking and other premium dimensional stock a decking blade has a thin kerf with a raised shoulder. This allows it to easily cut through even the hardest pressure treated lumber or knots in cedar or teak. Most decking blades also have a radial slot which reduces warping while cutting and prevents deep saw marks.
Remodeling Blades
These blades are primarily used for demolition work. They have far less teeth then a finishing or decking blade, often as few as 10 or 12. The teeth are also very robust with square shoulders and a wide kerf. It is ideal for rough cutting and cuts where nails and other debris could be present. Since this type of blade is so aggressive there is a lot of chip out. Avoid using a remodeling blade on finishing type cuts.
General Purpose Blade
This blade is used for most general cutting. Almost every circular saw will have a general purpose blade included with it. They are great for ripping or cross-cutting but do have some tear-out so should be avoided with finishing cuts. General purpose blades will usually have 20 teeth with carbide tips and cut smoothly when sharp.
Cutting with a circular saw is one of the most common ways to rip and cross-cut lumber and plywood. However there is always a risk of kick-back. Set the depth of the blade so it is just slightly deeper then the thickness of your stock. This will reduce the risk of kick-back and other injuries.
About the Author
Accurate Woodworking Plans
provides wood working plans,
wood tools
and how to information for beginner, intermediate and advance wood workers.
 |
 Troy Bilt Bolen Belt Blades 1772170 1760959 42 inch  US $20.00
|
 Hustler Commercial Walk Behind Mower with Sulky US $2,125.00
|
 Cub Cadet 50 Lawn Mower Blade Set 3 piece US $28.00
|
 72 Hustler Blades US $42.06
|
 48 Hustler Scag and Great Dane Blades US $26.34
|
 66 Hustler Blades US $35.70
|
 Murray lawnmower blades to fit a 36 mower deck45390 US $5.50
|
 Cub Cadet 42 inch Mower Blades US $12.00
|
 Cub Cadet Z Force Tractors 60 inch blade set US $9.99
|
 Cub Cadet 50 Mower Deck US $9.99
|
 3 MTD Cub Cadet 185 in Star Blades 742 0679 942 0679 US $49.00
|
 WORX ECO 24V Cordless 19 Lawnmower US $319.99
|
 WHEEL HORSE TORO 36 LAWNMOWER BLADES SET OF THREE US $15.00
|
 1968 Wheel Horse Commando 8 with accesssories US $900.00
|
 NEW JOHN DEERE 42 BLADE SET GX22151 REPLACEMENT US $19.99
|
 wheel horse wheelhorse toro tiller rear hitch OEM st 5 US $40.00
|
 John Deere 155C Lawn Tractor Well Maintained US $405.00
|
 wheel horse wheelhorse toro tiller plow rear hitch 2 US $40.00
|
 John Deere 110 112 Front Lift Rod and Bracket Set US $.99
|
 Blade Balancer Sharpener NEW tool set any lawn mower US $4.25
|
 Toro Wheel Horse tractor 106637 48 blade set NEW US $23.68
|
 Grasshopper 320237 52 blade set for front deck 600700 US $19.96
|
 Toro Wheel Horse tractor 106636 42 blade set NEW US $23.68
|
 Friendly Robotics RL1000 Robomower Robo Lawn Mower US $1,199.99
|
 New Unused John Deere Z710A Zero Turn Mower 12 Hours US $5,900.00
|
 Nice John Deere 430 Diesel Lawn Tractor Mower US $3,950.00
|
 Used cub cadet mower deck parts all in working conditio US $75.00
|
 Oregon Blade Mate lawnmower zero turn tool fits Toro US $20.00
|
 NORS BLADE SET GATOR 44 DECK AYP MOWERS 3 EACH 95 904 US $40.00
|
 CUB CADET 48 RZT LAWNMOWER BLADE SET LOT OF 3 NEW US $9.99
|
 CUB CADET 48 SET OF 3 LAWNMOWER BLADES SET NEW US $9.99
|
 JOHN DEERE L130 LAWN GARDEN TRACTOR 23HP New Battery US $750.00
|
 John Deere 425 445 455 54 gator mower blades US $.99
|
 RANSOMES 300 REEL MOWER LAWN TRACTOR KUBOTA DIESEL 4X4 US $560.00 |
 22 Off Set Universal Lawn Mower Blade 1 Center Hole US $6.99
|
 24 Straight Universal Mower Blade 3 8 Center Hole US $6.99
|
 24 Off Set Universal Lawn Mower Blade 3 8 Center Hole US $6.99
|
 Cub Cadet 54 Heavy Duty High Lift Blades 742 0677 US $10.50
|
 MOWER BLADE 61 CUT LESCO 50170 5070 US $6.99
|
 MOWER BLADE LESCO 61 50170 5070 US $7.99
|
 CRAFTSMAN 54 RIDING MOWER DECK MULCH BLADES 187255 US $39.99
|
 CRAFTSMAN 50 INCH LAWN TRACTOR BLADES ZERO TURN 33149 US $25.99
|
 Recharge Mower ELECTRIC riding lawn mower US $1,500.00
|
 NEW CRAFTSMAN 38 MULCH KIT 33038 US $.99
|
 2008 John Deere Z850A Z trak commercial zero turn mower US $6,250.00
|
 JOHN DEERE 42 mulching blades NEW US $.99
|
 Brute Self Propelled Mower Briggs 675 TP 22 7800477 US $207.45
|
 Toro Super Recycler Mower SP 7TP Briggs 21 20092 MC US $499.95
|
 Toro Zero Turn Titan Z 74824 26 HP Kawasaki ZX6050 US $4,895.00
|
 Toro Super Recycler Self Propelled Kohler 7TP OHV 20099 US $499.95
|
 NEW IN PACKAGE 48 3 BLADE SET OF BLADES CRAFTSMAN US $19.99
|
 MTD 1031 Mower Blades US $1.00
|
 NEW BLACK DECKER CORDLESS LAWN MOWER CMM1200 DISPLAY US $300.00
|
 390515 MOWER BLADE JACOBSEN TURFCAT 25 US $8.99
|
 cub cadet blades off an older 42 inch deck US $10.00
|
 CRAFTSMAN 54 CUT RIDING MOWER TRACTOR GATOR BLADES US $39.99
|
 Robot Lawn Mower Automatic Electric Mower US $699.95
|
 Brute Push Mower Briggs Engine 65 TP 22 7800509 US $225.00
|
 Toro Recycler Self Propelled Mower Briggs 7tp 20333 US $399.00
|
 Cub Cadet 1215 38 inch Lawn Mower Blades US $20.00
|
 |
Bosch T5002 10-Piece Assorted T-Shank Jig Saw Blade Set List Price: $15.86 Sale Price: $11.73 Average Rating:   |
|
Includes (2) each of the most requested jigsaw blades: T101B, T144D, T119BO, T118A and T118B. In reusable plastic storage box. Bosch is the world-wide market leader for jig saw blades. This means uncompromising quality, innovative ideas and universal use... |
 |
Milwaukee 49-22-1129 12-Piece Ultimate Demolition Sawzall Blade Set List Price: $39.80 Sale Price: $20.50 Average Rating:  |
|
With twelve reciprocating saw blades for extreme cutting, and a handy storage pouch for easy access, this Sawzall blade kit gets you through that big remodel project with ease, and is great to have on hand for years of little jobs... |
 |
Black & Decker 75-639 Jigsaw Blades Set, Wood and Metal, 13-Pack List Price: $14.82 Sale Price: $9.49 |
 |
Milwaukee 49-22-1127 11-Piece Super Sawzall Bi-Metal Blade Set List Price: $34.92 Sale Price: $26.47 Average Rating: |
|
Bi-metal blades feature custom-ground teeth, set and hardened for maximum performance with 1/2-inch universal tang for reciprocating saws. Packaged in a reusable vinyl pouch, this general purpose Sawzall Blade kit includes one of each blade: -5031 and -5036 for fast cutting, roughing-in work (6 inch and 9 inch respectively), -5041 for wood scroll, -5162 for metal scroll, -5182 for metal cutting 3/16-inch to 1/4-inch, -5184 for metal cutting 1/8-inch to 3/16-inch, -5186 for metal cutting less than 1/8-inch thick... |
 |
BOSCH T18CHC 18-Piece Bosch Shank Jigsaw Blade Set With Brute Case List Price: $38.68 Sale Price: $19.00 Average Rating: |
|
The Bosch T18CHC 18 Piece T-Shank Jigsaw Blade Set Contains: -- (2) T119BO -- with 12 TPI for scroll cut in wood -- (3) T144D -- with 6 TPI for fast cut in thick wood -- (2) T101B -- with 10 TPI for fine cut in wood -- (1) T101BR -- with reverse tooth for laminates (10 TPI) -- (3) T118B -- with 14 TPI for metal -- (3) T118A -- with 14 TPI for thin metal -- (2) T234X -- with 8-12 TPI for thick & thin wood -- (1) T345XF -- With 6-10 TPI for general purpose -- (1) T123X -- with 12-18 TPI for thick & thin metal -- Molded plastic case |
 |
Milwaukee 49-22-0220 10-Piece General Purpose Hackzall Blade Set List Price: $26.20 Sale Price: $16.49 Average Rating: |
|
Milwaukee 49-22-0220 Hackzall Blade- 10 PC. General Purpose Set |
 |
DEWALT DW4892 Reciprocating Saw Blade Set with Case, 12-Piece List Price: $44.56 Sale Price: $19.00 Average Rating: |
|
The DeWalt DW4892 12-piece Reciprocating Saw Blade Set With Case provides a wide selection of blades for many common applications. The included case expands to hold 9-inch blades and is designed to fit in DeWalt power tool kit boxes for easy blade storage... |
 |
Mibro 416371 8-Inch Stacking Dado Blade Set List Price: $72.99 Sale Price: $36.45 Average Rating:  |
|
The Mibro 416371 8-inch stacking dado blade set includes 5 shims for precision work and micrograin carbide tipped blades for longevity and precision. It cuts smooth dados (grooves) from 1/8-inch to 3/16-inch... |
 |
Milwaukee 49-22-1126 7-Piece Super Sawzall Bi-Metal Blade Set List Price: $18.72 Sale Price: $12.69 Average Rating: |
|
Bi-metal blades feature custom ground teeth, set and hardened for maximum performance with 1/2" universal tang for reciprocating saws Includes one each blade -5031 fast cutting, roughing-in work and -5041 for wood scroll Packaged in a reusable vinyl pouch, this general purpose Sawzall Blade kit includes one each blade -5162 for metal scroll, -5182 for metal cutting 3/16"-1/4" and -5184 for metal cutting 1/8"-3/16" Also includes one each blade -5091 and -5092 for nail embedded wood & composition material (6 inch and 8 inch respectively) |
 |
Oshlun SDS-0842 8-Inch 42-tooth Stack Dado Set with 5/8-Inch Arbor List Price: $99.99 Sale Price: Too low to display Average Rating: |
|
This 16 piece stacked dado set is perfect for woodworker's who want a premium cut at an affordable price. Our woodworkers were amazed with the smooth, flat bottomed cuts from 1/4" to 29/32" wide. The precision ground C4 micro grain tungsten carbide tips cut through all types of hardwood, softwood and plywood with the greatest of ease - and stays sharp longer... |