Blades Set
Jul/100
Blades Set
Choosing The Right Circular Saw Blade
You can have a top of the line circular saw but without a good blade it doesn't amount to much. Having the right blade for the job you are doing is critical to making a clean cut and making the cut safely. Depending on the material you are cutting and the results you are looking for you have to choose a blade for your circular saw accordingly.
Generally the blade will be a standard 7-1/4" in diameter. You can get general purpose blades for under $10 but to get a high quality blade you can expect to pay $50, $75 or more.
When choosing a blade I prefer to have a thin-kerf blade since it is easier to make a cut (kerf refers to the width of the cutting teeth). I also inspect the blade to make sure there are no chips in the carbide teeth. Running your finger nail along the edge of the blade will reveal any pits that you cannot see.
The blade and teeth should have no rust and be smooth and shiny. A dirty blade requires more force to make a cut which will result in a rough cut or cause an injury. Any dirty blades should be cleaned by using an industrial cleaner. This will dissolve any pitch or gummy substances left from cutting wood.
Different circular saw blades and their uses
Masonry Blade
A masonry blade is smooth with no teeth. This is because it grinds material away rather then cuts it. When using a masonry blade you should always wear a dust mask to prevent inhaling and hazardous substances. Masonry blades are ideal for scoring concrete pavers or cutting bricks.
Plywood Blade
Ideal for cutting cabinet grade plywood or plywood with a thin veneer, plywood blades nibble away the wood rather then chew it up like a general purpose blade. A plywood blade has a lot more teeth then other types of circular saw blades, often over 70 teeth. This makes for a very clean cut with no chip-out.
Chisel Tooth Blades
These types of blades are what usually come with a low to mid range circular saw. They often have only steel teeth which cut very well when sharp but are easily dulled. They are seldom used by professional since they do not maintain their cutting edge.
Trim Blades
Primarily for finishing cuts, a trim blade has 40 to 60 teeth, each with a premium carbide tip. A trim blade cuts slower then a general purpose blade but leaves a smooth sharp edge. They are ideal for cross cutting dimensional lumber and cutting plywood.
Decking Blades
Used for trimming off decking and other premium dimensional stock a decking blade has a thin kerf with a raised shoulder. This allows it to easily cut through even the hardest pressure treated lumber or knots in cedar or teak. Most decking blades also have a radial slot which reduces warping while cutting and prevents deep saw marks.
Remodeling Blades
These blades are primarily used for demolition work. They have far less teeth then a finishing or decking blade, often as few as 10 or 12. The teeth are also very robust with square shoulders and a wide kerf. It is ideal for rough cutting and cuts where nails and other debris could be present. Since this type of blade is so aggressive there is a lot of chip out. Avoid using a remodeling blade on finishing type cuts.
General Purpose Blade
This blade is used for most general cutting. Almost every circular saw will have a general purpose blade included with it. They are great for ripping or cross-cutting but do have some tear-out so should be avoided with finishing cuts. General purpose blades will usually have 20 teeth with carbide tips and cut smoothly when sharp.
Cutting with a circular saw is one of the most common ways to rip and cross-cut lumber and plywood. However there is always a risk of kick-back. Set the depth of the blade so it is just slightly deeper then the thickness of your stock. This will reduce the risk of kick-back and other injuries.
About the Author
Accurate Woodworking Plans
provides wood working plans,
wood tools
and how to information for beginner, intermediate and advance wood workers.
 |
 WORX ECO 24V Cordless 19 Lawnmower WG780  US $285.99
|
 42 Cub Cadet Lawn Mower Blades 759 04082 2 Blades NEW US $22.00
|
 New Wheel Horse Blade Set 32 Two Blades US $9.95
|
 CRAFTSMAN 54 CUT RIDING MOWER TRACTOR GATOR BLADES US $39.99
|
 pto pulley US $10.00
|
 MOWER BLADE LESCO 61 50170 5070 US $7.99
|
 Murray Push Mower Bagger 55 TP Briggs 22 7800202 US $119.00
|
 Brute Push Mower Briggs Engine 65 TP 22 7800509 US $225.00
|
 Toro Super Recycler Mower SP 7TP Briggs 21 20092 MC US $499.95
|
 Brute Self Propelled Mower Briggs 675 TP 22 7800477 US $249.00
|
 John Deere Lawn Mower Blades 48 US $1.00
|
 18 Off Set Universal Lawn Mower Blade 1 Center Hole US $4.99
|
 24 Straight Universal Mower Blade 3 8 Center Hole US $6.99
|
 22 Off Set Universal Lawn Mower Blade 1 Center Hole US $6.99
|
 Snapper NXT2346 Riding Lawn Tractor New w Warranty US $2,499.99
|
 CRAFTSMAN 48 RIDING MOWER DECK MULCH BLADES 173921 US $29.99
|
 Cub Cadet 1250 riding mower snow plow project US $199.00
|
 Toro walk behind self propelled mower commercial 48 US $3,499.99
|
 MURRAY 40 MULCH BLADE KIT PART 456251 US $10.00
|
 Toro Recycler Self Propelled Mower Briggs 7tp 20333 US $399.00
|
 Yard Machines Ride Mower Briggs 135 HP 38 13AC762F000 US $799.95
|
 Toro Super Bagger Self Propelled Honda 55 HP 20197 US $599.95
|
 New 12 HP 38 Cut White Lawn Mower Blades 2 US $.99
|
 MTD Riding Lawn Mower Blades US $4.99
|
 TORO TIME CUTTER Z 50IN BLADE SET US $17.50
|
 TORO 46INCH LAWN MOWER BLADE SET US $16.00
|
 CUB CADET 46 INCH MOWER BLADES US $18.00
|
 lawn mower blade set 46 inch US $7.50
|
 John Deere Zero Turn Z820 Commercial Mower Low Hours US $4,850.00
|
 Wheel Horse 314A Garden Tractor US $1,300.00
|
 CRAFTSMAN 54 RIDING MOWER DECK MULCH BLADES 187255 US $39.99
|
 Gator 3 in 1 mulcher blades US $20.00
|
 JOHN DEERE M128485 60 DECK BLADES SET OF 3 US $55.00
|
 Toro 36 inch walk behind mower lawn not exmark US $455.00
|
 48 Hustler Scag and Great Dane Blades US $26.34
|
 72 Hustler Blades US $42.06
|
 66 Hustler Blades US $35.70
|
 2007 SCAG 48 Walk Behind Mower US $2,500.00
|
 MTD Yardman 45 hp 21 Mulching Push Mower BONUS US $60.00
|
 MTD 6 hp S P Mulching Mower BONUS US $85.00
|
 Craftsman 675 hp S P Mulching Mower bag available US $80.00
|
 Bunton Zero Turn US $200.00
|
 Yard Machines Ride Mower Briggs 165 HP 42 13AN772S000 US $999.00
|
 Husgvarna 20K46 riding mower in excellent condition US $1,600.00
|
 3EA JOHN DEERE 19 1 2 GATOR MOWER BLADES M82408 US $24.99
|
 New MTD 50 mower blade set Troy Bilt Huskee Bolens $84 US $29.99
|
 JOHN DEERE FRONT MOWER MODEL P912 60DECK US $1,750.00
|
 hustler z 60 XR 7 US $5,200.00
|
 Wheel Horse 36 Rear Discharge Mower Deck Blades US $24.99
|
 HOWARD PRICE 18OT BATWING MOWER 100 HP W CUMMINS TURBO US $4,050.00 |
 The Brill Razorcut Push Reel Mower with Silent Cut US $150.00
|
 John Deere STX 38 Garden Tractor US $745.00
|
 52 ZERO TURN US $3,500.00
|
 60 Super Z Hustler Blades US $32.22
|
 Blade Balancer Sharpener NEW tool set any lawn mower US $6.79
|
 Case Ingersol obsolete left hand blade used in 48 set US $7.99
|
 John Deere 110 112 120 212 214 mower blade retainers US $3.99
|
 SNAPPER 52 BLADE SET 3 BLADES NEW LOOK US $9.99
|
 CRAFTSMAN AYP SEARS SPINDLES SET 36 38 42 W BOLTS US $49.99
|
 REX500904 FORD LGT 125 1972 1981 42 MOWER BLADES US $19.38
|
 |
Milwaukee 49-22-1129 12-Piece Ultimate Demolition Sawzall Blade Set List Price: $39.80 Sale Price: $22.50 Average Rating:   |
|
With twelve reciprocating saw blades for extreme cutting, and a handy storage pouch for easy access, this Sawzall blade kit gets you through that big remodel project with ease, and is great to have on hand for years of little jobs... |
 |
DEWALT DW4890 15-Piece Reciprocating Saw Blade Tough Case Set List Price: $40.54 Sale Price: $24.99 Used From: $21.99 Average Rating:  |
|
Whether you're cutting through wood, metal, or old, crumbly drywall, there's a blade in the DeWalt DW4890 15-Piece Reciprocating Saw Blade Set that can help you work more efficiently. Professionals know that job-specific tools make all the difference, and having different types of blade at your disposal can make one saw seem like three distinctive tools... |
 |
Mibro 416371 8-Inch Stacking Dado Blade Set List Price: $72.99 Sale Price: $33.27 Average Rating:  |
|
The Mibro 416371 8-inch stacking dado blade set includes 5 shims for precision work and micrograin carbide tipped blades for longevity and precision. It cuts smooth dados (grooves) from 1/8-inch to 3/16-inch... |
 |
Bosch TC21HC 21-Piece T-Shank Contractor Jig Saw Blade Set List Price: $42.82 Sale Price: $28.99 Average Rating:  |
|
TC21HC Model Code: AE - Price is for 1 AS (part# TC21HC) This item features: -Applicable Materials: Metal, OSB, Plywood, Soft/Hard Wood. -Cutting Edge Material: Carbon Steel. -Shank Type: ''T''. -Tang Shape: Straight... |
 |
2 Gator Mulcher 3-in-1 Blade to Replace the 405380 Blades. Craftsman, AYP, Poulan, Husqvarna (set of 2) Sale Price: $30.99 |
 |
SE Jewelers Saw Blades 144pc Set List Price: $9.75 Sale Price: $6.06 Average Rating: |
|
Sizes 4/0, 3/0, 2/0, 0, 1, 2 5.25" Length, Fits to 6" Saw |
 |
Milwaukee 49-22-1126 7-Piece Super Sawzall Bi-Metal Blade Set List Price: $18.72 Sale Price: $11.99 Average Rating: |
|
Bi-metal blades feature custom ground teeth, set and hardened for maximum performance with 1/2" universal tang for reciprocating saws Includes one each blade -5031 fast cutting, roughing-in work and -5041 for wood scroll Packaged in a reusable vinyl pouch, this general purpose Sawzall Blade kit includes one each blade -5162 for metal scroll, -5182 for metal cutting 3/16"-1/4" and -5184 for metal cutting 1/8"-3/16" Also includes one each blade -5091 and -5092 for nail embedded wood & composition material (6 inch and 8 inch respectively) |
 |
Neiko 80-Piece Premium-Grade 1/2" Inch Tungsten Carbide Router Bit Set - 3 and 2 Blade - Aluminum Case List Price: $199.99 Sale Price: $94.98 Average Rating: |
|
Includes all of these bits: Ten three-blade router bits: straight: 1/2, 5/8, 3/4 and 1"; flush trim: 1/2, 1/2 x 1"; slot cutter: 1/4, 3/8, 5/16 and 1/2". 70 two-blade bits: 25 degree trimming: 1/2"; 30 degree trimming: 1/2"; flush trim: 3/8", 3/8" x 1"; Corner round: 1/8, 3/16, 1/4, 5/16, 3/8, 1/2, 5/8, 3/4" and 1"; cove: 1/8, 3/16, 1/4, 5/16, 3/8 and 1/2"; beading: 1/4, 3/8, 5/8, 3/4 and 1"; Roman ogee: 5/16, 1/2; Classical cove: 1/2"; Classical: 3/8 and 1/2" ; Ogee flute: R3/16"; Double Roman: 1/4 and 5/8"; wave edge: 5/16"; 60 degree horse-nose: 5/8; Rabbeting: 3/8"; 45 degree chamfer: 1/2"; 30 degree chamfer: 5/8"; 22... |
 |
Bosch T5002 10-Piece Assorted T-Shank Jig Saw Blade Set List Price: $15.86 Sale Price: $10.17 Average Rating: |
|
Includes (2) each of the most requested jigsaw blades: T101B, T144D, T119BO, T118A and T118B. In reusable plastic storage box. Bosch is the world-wide market leader for jig saw blades. This means uncompromising quality, innovative ideas and universal use... |
 |
Milwaukee 49-22-1127 11-Piece Super Sawzall Bi-Metal Blade Set List Price: $34.92 Sale Price: $26.06 Average Rating: |
|
Bi-metal blades feature custom-ground teeth, set and hardened for maximum performance with 1/2-inch universal tang for reciprocating saws. Packaged in a reusable vinyl pouch, this general purpose Sawzall Blade kit includes one of each blade: -5031 and -5036 for fast cutting, roughing-in work (6 inch and 9 inch respectively), -5041 for wood scroll, -5162 for metal scroll, -5182 for metal cutting 3/16-inch to 1/4-inch, -5184 for metal cutting 1/8-inch to 3/16-inch, -5186 for metal cutting less than 1/8-inch thick... |
No comments yet.
Sorry, the comment form is closed at this time.
No trackbacks yet.